DRY STAINERS
No longer available
DRY STAINERS
€14,750 + iva
Albano Laziale, Italy
Description
The satin finishing machine allows you to carry out finishing and satin finishing operations on details with flat surfaces such as plates and sheet metal, bars and tubular elements with a square or rectangular section.
The processing takes place by means of an abrasive belt, which, adjusted according to the thickness of the detail, performs the smoothing of one face for each single pass, combined with a conveyor belt which carries out the automatic advancement of the details.
In addition to smoothing, satin-finishing and finishing operations in general, it is possible, with the sole replacement of the abrasive belt, to carry out grinding and deburring operations on parts cut by shear or with thermal cutting such as oxyfuel and laser.
Belts of any type of abrasive grain (corundum, zirconium, ceramic, diamond, agglomerate, cork, Trizact, Scotch-Brite etc. etc.) can be assembled in the machine to obtain different finishing qualities.
Support roller conveyors can be added to the machine, both incoming and outgoing, as it has been specifically designed with a fixed-height conveyor belt to facilitate the processing of bars and long parts.
Specifications
Manufacturer | IBETAMAC |
Year | 2023 |
Condition | New |
Power supply (volt/hz/phase) | 400-50-3 |
Engine power (kw/hp) | 5 /6.5 |
Engine speed rpm | 1400 - 2800 |
Machine dimensions (Width x Depth x Height) | 1250 x 870 x H. 1850 |
Standard machine weight | 570kg |
Sanding belt quantity | 1 |
Sanding belt size (Width x Development) | 220 x 1750 mm |
Peripheral speed | 6 - 12m/sec |
Grooved rubber contact wheel size (width x diameter) | Ø80 x 220 | 60mm |
Conveyor belt size | 220 x 2350 mm |