2022 IBETAMAC CC90

The CC90 mandrelless bending machines are ideal for bending with consistent quality for tubes, square bars, solids and other profiles. - Maximum capacity in S275 steel round tube: 90mm or 3 ”Schedule-40 or 3” 1/2 x 6mm. - Maximum capacity in aluminum tube: 88.9mm x 10mm - Maximum capacity in stainless steel tube. 304/316: 88.9mm x 4mm - Maximum capacity in square tube: 60x60x4mm - Maximum angle of curvature: 180º - Automatic rotation speed from 0.75 to 2.2 rpm - Minimum bending radius: 3 times the diameter of the tube. - Maximum radius of curvature: 346mm - Repetitiveness in the curve of +/- 0.1 degrees - Reinforcement arm for pipes with diameters greater than 40 mm included. - 400ml BEND 8 lubricant included. - Two bending directions, right / left, to facilitate folding. - Quick mold replacement system: maximum 60 seconds. - Technology 4.0 - CNC control unit with 7 ”touch screen in more than 20 languages - Safety pedal left and right. - Side shelves for storing the molds. - All the molds are in hardened steel to avoid possible wear. - The counter-molds are made of copper-aluminum alloys to avoid marking the outside of the curve. - Storage of up to 10,000 programs. - Programming up to 50 different angles in the same piece. - Programming of measurement in inches or millimeters. - Rotating trolley with automatic disengagement that facilitates the extraction of the material. - Automatic and programmable springback correction. - Engine power: 4 KW / 5.5 HP. - Motor power: 230 / 400V Trifásica 50 / 60Hz - Intensity: 16/9 A - Machine weight: 900Kg - Lower bed on pallet for transporting the machine to the point of use, or to the warehouse. - The CC90 tube bender is delivered fully assembled. - 3-layer cardboard box, suitable for sea transport. - Optional: NIMF15 wooden packing. - All capabilities are based on ASTM Carbon Steel Pipe Standard, A-53 Grade A standard with a maximum tensile strength of 330 MPa. Tubes with more thickness than established and materials with more resistance reduce the capabilities of the machine. Check with your material supplier for specifics. Technology 4.0: This technology allows the machine to be connected remotely to the manufacturer's technical department which can update the software, detect possible anomalies ... Robustness and speed: If you look at the weight of the car compared to other brands, you can get an idea of ​​how it is built. We are not talking about do-it-yourself machines, but bending machines that can work 24 hours a day. Curve thicknesses and finishes: The new counter-molds designed by Nargesa guarantee perfect finishes even with thin thicknesses. Head displaced and folded in both directions: The design of the displaced head allows you to create complex curves, passing under the head itself. Improved energy efficiency: Consumption, in relation to the capacity of the machine, has been significantly reduced, with consequent energy savings. Automatic disengagement: The clamping carriage moves automatically to the right or left according to the direction of curvature; in this way the evacuation of the piece is facilitated, without the need to re-adjust the clamping. Brace tie included: The CC90 CNC pipe bender comes with brace arm as standard. Bend 8 lubricant included: With the purchase of the CC90 CNC tube bender you are supplied with a 400ml can of special bending lubricant ESA S625 CNC CONTROL The bending machines without core are equipped with a control unit with a 7 "color touch screen, very intuitive and easy to use, with the latest 4.0 generation technology. Simply enter the size of the tube, the thickness, the bending angle or the curves, select the mold from the library and the control unit automatically sets the rest of the parameters; the correction of the elastic return (springback), the recommended rotation speed, the need or not to use the reinforcement rod and the feasibility of creating a bend are all parameters that can be modified by the end customer, according to his needs. Here are some of the most important features of the control unit mentioned above. - Storage of up to 10,000 programs. - Programming up to 50 different angles in the same piece. - Programming of measurement in inches or millimeters. - Library of molds available with the possibility of programming new ones. - Library of different shapes and thicknesses of tubes. - The CNC is delivered in more than 20 different languages. - Rotation speed from 0.7 to 4.5 rpm, with automatic or manual adjustment. - Manual or automatic operating mode. - Automatic correction of springback (springback). - Piece counter. - Correction of the final degree of curvature independently programmable. - Technology 4.0 - Alarm diagnosis on display. - Preventive maintenance notice. - Possibility of remote connection by the manufacturer, without needing to be present. - Notice on the display of the need or not to use the reinforcement rod. - 7 ”800x480 touch screen resolution - 128MB silicon hard disk - 2 analog inputs, 12 bit resolution. - 16 digital inputs (24 Vdc). - 16 digital outputs (24 Vdc, 0.7 A max.) Protected against overloads and short circuits. - 1 RS232 series port - 1 CAN port with 9 contacts with SubD F connector. - 24 Vdc power source. - 1 USB port [Set of dies Diameter 40mm Radius 120mm] (https://www.nargesa.com/it/macchinari-industriali/curvatrice-di-tubi-senza-anima-cc90-cnc/#collapseOpt6)