2022 IBETAMAC CC60

The new generation of CC60 mandrelless tube bending machines is capable of bending empty tubes up to 180º with maximum finishing quality, maximum speed and lower thickness than other machines belonging to the same category. The pipes can be round, oval, square, rectangular and made of various types of materials such as iron, aluminum, stainless steel, copper. Nargesa mandrelless bending machines are ideal for bending with consistent quality for tubes, square bars, solids and other profiles. - Maximum capacity in S275 steel round tube: 60.3 mm or 2 "Schedule-40 or 2" 1/4 x 4 mm. - Maximum capacity in aluminum tube: 60.3mm x 8mm - Maximum capacity in stainless steel tube. 304/316: 60.3mm x 3mm - Maximum capacity in square tube: 40 x 40 x 4 mm - Maximum angle of curvature: 180º - Automatic rotation speed from 1.1 to 3.5 rpm - Minimum bending radius: 3 times the diameter of the tube. - Maximum radius of curvature: 320 mm - Repetitiveness in the curve of +/- 0.1 degrees - Reinforcement arm for pipes with diameters greater than 40 mm included. - 400ml BEND 8 lubricant included. - Two bending directions, right / left, to facilitate folding. - Quick mold replacement system: maximum 60 seconds. - Technology 4.0 - CNC control unit with 7 ”touch screen in more than 20 languages - Safety pedal left and right. - Side shelves for storing the molds. - All the molds are in hardened steel to avoid possible wear. - The counter-molds are made of copper-aluminum alloys to avoid marking the outside of the curve. - Storage of up to 10,000 programs. - Programming up to 50 different angles in the same piece. - Programming of measurement in inches or millimeters. - Rotating trolley with automatic disengagement that facilitates the extraction of the material. - Automatic and programmable springback correction. - Engine power: 1.1 kW / 1.5 HP - Electric voltage: 230V single-phase 50 / 60Hz - Optional 110V single phase 50 / 60Hz voltage - Intensity: 5 A - Machine weight: 365Kg - Lower bed on pallet for transporting the machine to the point of use, or to the warehouse. - The CC60 tube bender is delivered fully assembled. - Iron pallet and 3-layer cardboard box, suitable for sea transport. - Optional: NIMF15 wooden packing. - All capabilities are based on ASTM Carbon Steel Pipe Standard, A-53 Grade A standard with a maximum tensile strength of 330 MPa. Tubes with more thickness than established and materials with more resistance reduce the capabilities of the machine. Check with your material supplier for specifics.